Automatic Power Factor Corrector Panel (APFC)
Automatic Power Factor Corrector Panel (APFC)
Operation
Automatic Power Factor Control or APFC Panels are mainly used for the improvement of Power Factor. Power Factor is the ratio of active power to apparent power and it is a major component in measuring electrical consumption. APFC is an automatic power factor control panel which is used to improve the power factor, whenever required, by switching ON and OFF the required capacitor bank units automatically.
Special Features
| Regulator Technology | High Frequency 20k Hz IGBT Driven Voltage Regulation Converter. Pulse Width Modulated (PWM) Controlled Direct AC To AC 32 Bit Digital Converter Topology. 7" Coloured Touch Interface (Optional) Synchronised Operation Of 3 Phase Converters Closed Loop Control |
| Input | 230 Volts AC,1-Phase, 2 Wire, 50Hz |
| Nominal Voltage | 400 Volts AC, 3-Phase, 4 Wire, 50Hz |
| Input | 1.195V-265V/200V-260V/170V-300V AC,1-Phase, 2 Wire, 50 Hz |
| Nominal IOperating Voltage Ranges | 2. 340V-460V/350V-450V/300V-500V, AC, 3-Phasse, 4 Wire, 50Hz (Other Voltage Ranges Available On Specific Order) |
| Output Nominal Voltage | 230/400V +1-0.5% AC, Single /Three Phase |
| Input Nominal Frequency | less then 100 Us |
| Efficiency | Better Than 98.5% |
| Protections | Over Current Protection Output Under/Over Voltage Protection Semiconductor Fuses Soft Start Facility ( Stabilized Output Voltage, On Mains Restoration) Typer 2 Surge Suppressors Output Contactor/MCCB (Optional) Input MCCB/MCB (Optional) |
| MMI (Optional) | 7 Coloured Interface (Optional) Input/Output Voltages Input /Output (Optional) Current Current/Voltage Waveforms Operator Activity Log Stack Temperaure Converter Current |
| Enviroment | Indoor IP 42 Ambient Temperature - Upto 50 Degree Relative Humidity : 95% (Non Condensing) |
| Available Ratings | 3 Phase : 6 KVA - 500 KVA |
| 1Phase : 2 KVA - 50 KVA |
