| Servo
Controlled Voltage Stabilizer |
| |
Features: |
|
 |
|
| Corrects voltage automatically
and continuously. |
Induction
motors operate at high efficiency and improved power factor
when supplied constant voltages. |
Protects costly
manufacturing equipments from menace of High/Low Voltages, thus
cutting on the maintenance cost. |
Less
Production losses & better efficiency in plant.
Increased Productivity. |
100%
depreciation from Income Tax. |
Reduces MDI
and saves power. |
Reduction
in electricity bills up to the level of approximately 15% (This
depends on the input variation, loading and the number if working
hours) |
Saves
on diesel cost, as generator is not required to run at high/low
input voltages. |
The average
pay back period of Servo Controlled Voltage Stabilizer owing
to its high energy saving capability is approx. 18 months. |
| |
|
|
 |
|
| |
|
CAPACITY |
1
KVA TO 500 KVA (SINGLE PHASE) |
| 3
KVA TO 2000 KVA (THREE PHASE) |
|
INPUT VOLTAGE RANGE |
150
V - 270 V, 170 V TO 270 V (SINGLE PHASE) |
| 260
V TO 470 V, 300 V TO 470 V (THREE PHASE) |
|
(OTHER RANGES AVAILABLE ON SPECIAL ORDER) |
|
OUTPUT VOLTAGE |
230
V / 240 V SINGLE PHASE (ADJUSTABLE) |
| 400
V TO 415 V THREE PHASE (ADJUSTABLE) |
|
REGULATION |
+
1% OR BETTER |
|
SUPPLY FREQUENCY |
47
MHz - 53 Hz |
|
EFFICIENCY |
>
98.6% |
|
EFFECT OF LOAD POWER FACTOR |
NIL |
|
WAVE FORM DISTORTION |
NIL |
|
RATE OF CORRECTION |
BETTER THAN 36 V / SEC. IN AN |
|
BETTER THAN 20 V/SEC. IN ON AN |
|
DUTY CYCLE |
100% CONTINUOUS |
|
RESPONSE TIME |
LESS THAN 10 MS |
|
COOLING |
AN
ON AN |
|
OVERLOAD CAPABILITIES |
UP
TO 200% MOMENTARILY |
| NO
LOAD LOSSES |
LESS THAN 0.8% OVER ENTIRE RANGE |
|
SUITABILITY |
SUITABLE FOR 3 PHASE UNBALANCED/BALANCED SUPPLY
& UNBALANCED / BALANCED LOAD |
|
MOUNTING |
ON
WHEELS |
|
EARTHING |
TWO
NUMBERS OF EARTHING TERMINALS |
|
CABLE TERMINATION BOX |
INPUT/OUTPUT CONNECTIONS |
|
AMBIENT TEMPERATURE |
-100
C TO 500 C |
|
RELATIVE HUMIDITY |
UP
TO 95% |
|
|
